User Tools

Site Tools


This is an old revision of the document!

Regular checkup after you have used Moai over an extended period of time

Physical check up

Z-Axis and Build Platform

Please check these screws. 8 on the Build Plate Arm, 2 on z-axis from the front side. 6 on the build platform that is holding the vat. (3 on each sides)

From the back of the machine, double check to make sure Z-axis is mounted securely by checking these 8 screws

Tilt Mechanism

Check these 6 screws to make sure they are fully tightened and the metal rod is locked. This is what you will see when looking in from the left frame side:

Vat cage

Rod locking

Firmeware to latest

Setting to the latest

moai-checkup.1512551362.txt.gz · Last modified: 2017/12/06 03:09 by peopoly