For assembling, please follow Hardware Installation Manual:
For complete installation process, please follow user guide.
After Moai is assembled, it would require calibrations to get it working.
It is best to go through the Complete Calibration Guide first.
Leveling is one of the most important and often missed step. You can learn more here.
Advance Moai calibration guide: https://drive.google.com/open?id=17EYM9WTy9HMLh6x3lLFIOnQ_dxqDnTRWgukOVBkIxvg
Firmware and settings:
Latest firmware and Latest firmware Settings:Firmware
What firmware settings mean: System Setting
z-axis check https://forum.peopoly.net/t/check-your-z-axis-screws-for-build-plate-arm/214
z-axis accuracy check Without the base, the cylinder is 30mm high https://drive.google.com/open?id=0Bzke6lBHG_z5dllYZnhURXdJWEU
Moai printables add-on https://www.thingiverse.com/groups/peopoly-moai/things