User Tools

Site Tools


This is an old revision of the document!

Moai Hardware


  • Physical Size: 30 x 30 x 63 cm
  • Print Volume: 13 x 13 x 18 cm
  • Weight: 15 kg
  • Laser Type: 405nm UV LED laser
  • Laser Power: 150mW
  • Slicer: Cura 2.6 Moai
  • Operating System: Windows, OSX, Linux
  • Power Input: 100-240V 50/60Hz 2.0A
  • Power Requirement: 24 V - 2.5A
  • Processor: 32 bit ARM processor
  • Print Format: Gcode
  • Shipping Size: 75 x 45 x 30 cm
  • Shipping Weight: 21 kg


For assembling, please follow Hardware Installation Manual:

For complete installation user guide:


After Moai is assembled, it would require calibrations to get it working.

Complete Calibration Guide:


Advance Moai calibration guide:

Firmware and settings:

Latest firmware:

Latest firmware Settings:

What firmware settings means :


z-axis check

z-axis accuracy check Without the base, the cylinder is 30mm high

Moai printables add-on

moai-hardware.1510913121.txt.gz · Last modified: 2017/11/17 04:05 by peopoly