User Tools

Site Tools


moai-sdcard

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
Next revision Both sides next revision
moai-sdcard [2018/06/14 10:05]
lyndondr created
moai-sdcard [2018/06/14 10:25]
lyndondr
Line 1: Line 1:
 ====== SD Card Usage ====== ====== SD Card Usage ======
 +
 +Here is a couple of Peopoly posts regarding SD card usage issues.
 +
 +==== Facebook Post ====
  
  We have noticed that a high percentage of file read issues resulted from user deleting gcode file right before adding new gcode to the same SD card. We are still verifying the cause and for now, we recommend user not to delete files from SD card. If you need more space, just format the card using the  We have noticed that a high percentage of file read issues resulted from user deleting gcode file right before adding new gcode to the same SD card. We are still verifying the cause and for now, we recommend user not to delete files from SD card. If you need more space, just format the card using the
Line 6: Line 10:
  
 We will follow up on the situation We will follow up on the situation
 +
 +==== Forum Post ====
 +
 +It is best to save gcode to harddrive and copy directly to the sd card’s Gcode directory. Don’t delete or move any files. If you want to start a big print, reformat using SD formater and print.
 +
 +We believe we have found the problems for this in firmware and SD card reader, but it will take some time to address. Please use above method until fixed.
 +
 +
moai-sdcard.txt · Last modified: 2019/01/15 04:56 by peopoly