Differences

This shows you the differences between two versions of the page.

--- moai-sdcard [2018/06/14 15:24]
lyndondr
+++ moai-sdcard [2018/12/19 13:50]
peopoly
@@ Line 1: / Line 1: @@
 ====== SD Card Usage ======
-This is a quick assembly of posts regarding SD card issues.
+Here is a couple of Peopoly posts regarding SD card usage issues.
 ==== Facebook Post ====
@@ Line 13: / Line 13: @@
 ==== Forum Post ====
-It is best to save gcode to harddrive and copy directly to the sd card’s Gcode directory. Don’t delete or move any files. If you want to start a big print, reformat using SD formater and print.
+It is best to save gcode to hard drive and copy directly to the sd card’s Gcode directory. Don’t delete or move any files. If you want to start a big print, reformat using SD formater and print.
-We believe we have found the problems for this in firmware and SD card reader, but it will take some time to address. Please use above method until fixed.
+Use a name other than "gcode" for your directory and do not nested subdirectories. We use "print" in our lab and has worked pretty well.

Wiki