User Tools

Site Tools


moai-sdcard

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
moai-sdcard [2018/06/14 10:25]
lyndondr
moai-sdcard [2019/01/15 04:56]
peopoly
Line 13: Line 13:
 ==== Forum Post ==== ==== Forum Post ====
  
-It is best to save gcode to harddrive ​and copy directly to the sd card’s ​Gcode directory. Don’t delete or move any files. If you want to start a big print, reformat using SD formater and print.+It is best to save gcode to hard drive and copy directly to the sd card’s directory. Don’t delete or move any files. If you want to start a big print, reformat using SD formater and print.
  
-We believe we have found the problems ​for this in firmware and SD card reader, but it will take some time to addressPlease ​use above method until fixed.+We recommend use "​print"​ as the directory name for keep your gcodes. ​ Do not keep gcodes ​in root directory as Moai will not be able to find it. 
 + 
 +Use a name other than "​gcode"​ for your directory and do not nested subdirectories. We use "​print"​ in our lab and has worked pretty well
  
  
moai-sdcard.txt · Last modified: 2019/01/15 04:56 by peopoly