User Tools

Site Tools


moai-troubleshooting

This is an old revision of the document!


Moai - Troubleshooting

*We will organize these into groups. For now, it may be best for reader to use search functions

For completely step by step troubleshooting, please use the mindmap. : https://drive.google.com/open?id=0Bzke6lBHG_z5a3lFbmxwd2tlbk0

you will have to open it via mindmup.com. We are working on a public site version that doesn't require signing into mindmup

Quick Questions: What kind of resins can Moai use? Moai can use Formlabs resins as well as many other brands. Moai can basically use almost all 405nm UV resin. Please check resin exposre reference and in discussion forum to confirm. For new users, we recommend getting at least 1 liter of Moai resin for initial learning.

How large can Moai print? 13 x 13 x 18 cm

Where can I get Moai parts if I broke a part? You can buy from reseller.

What is energy rating of Moai’s laser module? It is a 150mW 405nm UV laser module with 70um spot width.

How long is the build time? 4-6 hours depending on experience. No soldering needed. All tools required

What else do I have to buy besides Moai kit to start printing? Just Moai resins

What are the consumables? Vat and Laser Modules

- Specific help Test ring Gcode for checking printer https://drive.google.com/open?id=0Bzke6lBHG_z5ajN6VU1scll6QTQ

z-axis check https://forum.peopoly.net/t/check-your-z-axis-screws-for-build-plate-arm/214

z-axis accuracy check Without the base, the cylinder is 30mm high https://drive.google.com/open?id=0Bzke6lBHG_z5dllYZnhURXdJWEU

osx fix https://forum.peopoly.net/t/solved-how-to-fix-lf-crlf-in-cura-mac-osx/362

Assembly Holes not tapped: https://forum.peopoly.net/t/assembly-screw-holes-not-tapped/154/14

SD card issue, use SD card formatter: https://www.sdcard.org/downloads/formatter_4/

moai-troubleshooting.1510998235.txt.gz · Last modified: 2017/11/18 09:43 by peopoly