User Tools

Site Tools


moai:advancedfepplate

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
moai:advancedfepplate [2019/04/28 03:29]
peopoly
moai:advancedfepplate [2019/05/09 02:37] (current)
peopoly
Line 2: Line 2:
    
  
-This guide is for the advanced acrylic plate designed to use in Moai and Moai 130 FEP vat. If you are using Moai 200, please do not use this guide.+This guide is for the advanced acrylic plate designed to use in Moai and Moai 130 FEP vat. If you are using Moai 200 glass plateeven the plate material is different, how the special film works is the same
  
  
Line 13: Line 13:
 {{:​moai:​adv_acry_plate_1.jpg?​nolink&​600|}} {{:​moai:​adv_acry_plate_1.jpg?​nolink&​600|}}
  
-For shipping, there may be protection wraps on both sides, you can remove them first. If you don't see a label on your plate, you can still identify which side has the film by looking at if there is a cleanly cut film on top of one side that looks like this. +For shipping, there may be protection wraps on both sides. You can remove them first. If you don't see a label on your plate, you can still identify which side has the film by looking at if there is a cleanly cut film on top of one side that looks like this. 
  
 {{:​moai:​adv_acry_plate_2.jpg?​nolink&​600|}} {{:​moai:​adv_acry_plate_2.jpg?​nolink&​600|}}
  
-The biggest clue is that the special film does not cover up the side vent holes. ​see pictures here.+The biggest clue is that the special film does not cover up the side vent holes. ​See pictures here.
  
 {{:​moai:​adv_acry_plate_3.jpg?​nolink&​600|}} {{:​moai:​adv_acry_plate_3.jpg?​nolink&​600|}}
  
-After removing the outside wrap and id the side with the film. Clean both sides with soapy water or spray some alcohol to quickly ​wipe off.  ​+After removing the outside wrap and id the side with the film, clean both sides with soapy water or spray some alcohol to wipe off dirty spots quickly.  ​
  
-And then you can install it as the regular ​plate using the instruction in [[moai:fepvatbuild|this wiki.]]+The proper way for this plate to work is as follow:
  
 +Laser light -> Acrylic Plate -> Special Film that is on the plate -> FEP film tensioned by the user on top of the plate with special film -> resin
 +
 +And then you can install it as the regular plate using the instruction in [[moai:​fepvatbuild|this wiki.]]
  
moai/advancedfepplate.txt ยท Last modified: 2019/05/09 02:37 by peopoly