Cura is the recommended slicing software for. Starting from Cura 3.5.1, Moai users can run the standard version of Cura available from Ultimaker. Here is the link to the files. PC and Mac are both available. PC Install Guide and Mac Install Guide. The default profile in Cura 3.5.1 is incorrect, make sure you download from Moai GitHub
C:\Users\“UserID”\AppData\Local\cura
and C:\Users\“UserID”\AppData\Roaming\cura
) before installing the new versionCustom
button at the top right, but you do not need to change anything.Custom
you might get confused because the infill settings do not reflect the custom settings. You must always run at 70% infill or higher (what the profiles have already set). Lower infill will cause your models to leak resin (I know this from experience -Ron).Use Regular Expression
and enter \n
\r\n
Custom
button at the top right, but you do not need to change anything.Custom
you might get confused because the infill settings do not reflect the custom settings. You must always run at 70% infill or higher (what the profiles have already set). Lower infil will cause your models to leak resin (I know this from experience -Ron).Cura is highly customizable and some users build their own profiles. When you are lost, make sure you check and download the most current profiles from Peopoly GitHub.
To print on Moai 200, go to printer setting under
And then click on Printer Setting and change volume size of X/Y/Z to 205/205/250 as seen here:
First time of use, please add Peopoly Moai printer from the Other menu.
Load an STL file from the File menu
The Labels on Cura platform shows where the print will be in the vat.
Use the upper right hand to select profiles such as Fine, Extra Fine and Max Quality.
Use lower right-hand option to slice and save to SD card