This is an old revision of the document!
This is outdated. Please use Cura 3.5 or newer version from Ultimaker. For more info, refer to Software
Cura 3.4.1 brings new features and fixes but is not optimized for SLA printing.
Here is how you can modify Windows version of Cura 3.4.1 for Moai. OSX/Linux version will be released soon.
Cura 3.4.1 from Ultimaker
Mods for Cura 3.4.1
Moai Profiles for Cura 3.4.1
4 Clean off Cura 2.x and 3.x
Delete all files in
5 Install Cura 3.4.1
Make sure do not run it after installation.
In case you forgot and run it, make sure decline on user agreement. Or you may have to start over.
6 Open programs directory in explorer
Location: C:\Program Files\Ultimaker Cura 3.4
Extract mods from Cura Moai 341 Mod.zip to replace everything in the above directory.
7 Run Cura, select Peopoly Moai.
8 Load profiles extracted from Cura-Moai-341-Profiles-Aug18.zip
9 Switch to Custom Mode and start slicing