User Tools

Site Tools


moai:moai

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
moai:moai [2018/07/23 13:28]
lyndondr
moai:moai [2019/07/11 10:45] (current)
peopoly
Line 52: Line 52:
 Compensate X/Y is how much concave to correct. X is fine, so 100 is the default. Y is compensated by the scale of 100 out of 100 (200). Compensate X/Y is how much concave to correct. X is fine, so 100 is the default. Y is compensated by the scale of 100 out of 100 (200).
  
 +=== Z Initial Speed ===
 +This is the "z moto speed" (tells you how fast the platform move during peel motion / layer change) during initial 30 layers.
 +
 +=== PM Initial Speed ===
 +This is the "pm moto speed" (tells you how fast the pm motor moves the vat in order to peel during layer change) for the initial 30 layers.
 +
 +=== Note === 
 +The "​Initial"​ term in the setting option names is reference for the first 30 layers. Within the first 30 layers is where the majority of print failures happen. This is why there is a separate option to tweak those layers to combat print failure. These settings should be slower (lower number), more conservative within these layers. Then progress to a more standard setting after the first 30 layers.
moai/moai.txt ยท Last modified: 2019/07/11 10:45 by peopoly