User Tools

Site Tools


phenom:selfsupportguide

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
phenom:selfsupportguide [2020/01/29 10:56]
peopoly
phenom:selfsupportguide [2020/05/10 04:20] (current)
peopoly
Line 4: Line 4:
 **How to get help** **How to get help**
  
-To better ​help us get you sorted as soon as possible, please provide ​as much information as you can about your situationPlease provide ​the following+Most of the time spent on support is to get the right information from the user so we can verify the situation and provide help.  ​To make sure you get the best and quickest ​help, we created this survey to get as much key information ​for printing ​as possible so that we can provide the correct solution and spot any issues you may have in your setup in addition to the issues you reported. 
 +Any photos of failed prints or issues, even if the failed object is still on the plate or in the vat, is very helpful.
  
-Any photos of failed prints or issues. , especially when it is still on the plate or in the vat?  +Here is the official [[https://​drive.google.com/​open?​id=1otthgUQJCfLMEpS0dYNxKthNDv5PcDQIKDqZcLy_dbs|support survey guide]].
- +
-A picture of how your LCD looks in the calibration modeYou can start the calibration mode by going into Tool menu on the touch screenAnd then press Calibration ->  +
- +
-The Type of resin  +
- +
-Environment temperature +
- +
-Profile settings used in Chitubox (or slicer of your choice) +
- +
-Support settings used in Chitubox (or slicer of your choice) +
- +
-A screen capture (picture) of how the model is set up to print in Chitibox (or slicer of your choice) +
- +
-Making sure the build platform is level to the LCD screen+
  
 +----
 +Self-help  ​
  
-You can reach out us via [email protected] and at the same time post in our user group on forum.peopoly.net and Facebook user group https://www.facebook.com/groups/2240866646207938+[[https://atlas.mindmup.com/peopoly/peopoly_phenom_troubleshooting/​index.html 
 +|Hardware Troubleshooting guide 
 +]]
  
 +[[https://​atlas.mindmup.com/​peopoly/​troubleshoot_print_issues/​index.html
 +|Print troubleshooting]]
  
 ---- ----
-Frequently asked questions+Frequently asked questions ​(need updates)
  
 Hardware, please follow it in order \\ Hardware, please follow it in order \\
phenom/selfsupportguide.1580316967.txt.gz · Last modified: 2020/01/29 10:56 by peopoly