¶ Guide to Attaching a Teflon Tube to the Y-axis Motor
This document guides you on how to attach a Teflon tube to the Y-axis motor, securing the Teflon tube clamp to the motor.
¶ 1. Download and Print the Model
Download the STEP file from this link:
https://drive.google.com/file/d/1FipdZ-E0z5yL442zqRPtSkqzNDwr5kKJ/view?usp=sharing
Import it into Orcaslicer.
We recommend using the Lancer PETG-C that comes with the Magneto X for printing. Please use the parameters shown in the figure below for printing.
¶ 2. Print and Install the Part
Print the downloaded model.
Remove the two screws from the Y-axis mover housing:
Then fix the printed part in place, securing the Teflon tube as well.
¶ 3. Placement of the Teflon Tube
Please refer to the figure below to properly place the Teflon tube so that its length can cover the movement distance of both the X-axis and Y-axis.
.png)