This document guides on how to obtain error codes for linear motors.
MagnetoSuperTool: https://drive.google.com/file/d/1CyOFBV5bzW6PHS3nrGwK1UYkzti1f3P9/view?usp=sharing
CH340 Driver Installation:
https://drive.google.com/file/d/1ugbnCXYBs2T3aSLttxoFAsL4RUzEKYEY/view?usp=sharing
Please loosen the screws as shown in the figure below and remove the cover of the electric control box:
(Note: Please use a Type-C data cable,this needs to be prepared by yourself)
#1 Click Update to refresh the COM ports
#2 Click Connect
#3 Click Get Version to see the returned version number
Keep the linear motor drive board connected to the PC, then operate the printer as normal. When the linear motor errors, similar error codes will continuously output on the PC software: