This document provides instructions on how to set up your slicing software to enable Jetstream.
Please ensure that your Jetstream is successfully installed and you can control it using the fan control function on the touchscreen.
This document provides instructions on how to set up your slicing software to enable Jetstream.
Please ensure that your Jetstream is successfully installed and you can control it using the fan control function on the touchscreen.
¶ 1. Enable Auxiliary Part Cooling Fan in Orca Slicer
Go to Printer settings -> Basic information -> Accessory, and enable the Auxiliary part cooling fan.
¶ 2. Set Fan Speed in Filament Settings
Configure the fan speed settings in the Filament settings section. Set the speed according to your actual needs
¶ 3. Manual Control of Jetstream Fan via Gcode Commands
To turn on the Jetstream fan: M106 P2 S255
To turn off the Jetstream fan: M107 P2