This manual provides guidance on how to assemble the linear motor kit.
¶ 1. Preparation
¶ 1.1 Printed Parts
Before receiving the kit, we recommend printing the following parts:
¶ 1.2 Unboxing
The package you receive should look like the image below:
The package contains all the components shown in the image:
¶ 2. Wiring
¶ 2.1 Linear Motor Wiring
First, take out the encoder/UVW cables from the linear motor box and begin installation:
Follow the steps below to connect one end of the cable:
For the other end, refer to the image below for the wiring instructions:
¶ 2.2 Marlin Mainboard Wiring
Touchscreen wiring:
Pulse signal wiring as shown in the image below:
Marlin mainboard 5V power wiring:
¶ 2.3 48V Power Wiring
The linear motor requires an external 48V (600W) power supply.
As shown below, you can use this terminal to supply power to the entire control system:
¶ 3. Motor Control Testing
Once the motor wiring is completed and powered on, you can control the motor's movement using the Marlin LCD control panel.
Follow the steps below to access the corresponding menu and control the motor:
¶ 4. Advanced Motor Testing
If you want to make more detailed adjustments to the motor parameters, please refer to this wiki and use the LinearMotorHost software tool to further fine-tune the linear motor:
https://wiki.peopoly.net/en/magneto/magneto-x/linearmotorhost-user-guide