¶ Must read before first print
This wiki provides essential recommendations for optimizing the use of the Magneto X, aiming to significantly improve your printing stability.
¶ Slicing only with Orca Slicer 1.8 Special Edition
Please slice exclusively with our Orca Slicer 1.8 Special Edition. This step alone can prevent numerous compatibility issues with OrcaSlicer 1.9. More information can be foundhere.
¶ Update Orca Slicer Profile
If you downloaded the Orca Slicer 1.8 Special Edition for Magneto X before February 27, 2024, please update the profile in Orcaslicer directly. Please refer to this link to complete the update
¶ Testing Material Settings
Due to the unique design of the Magneto X Lancer extruder, predicting the behavior of your preferred materials in terms of temperature and flow rate can be challenging. Unless you're using Peopoly's PLA-CF or PETG-CF, we advise conducting material tests in the following sequence:
- Run a Temperature Test: Start with temperature test in Orcaslicer's calibration
- Max Volumentric Speed: Once you've established the right temperature, proceed with flow rate testing to determine the best settings.
Set Max volumetic speed here:
- Adjust Printing Speed: Based on the results from your flow rate tests, adjust your printing speed. Consider your layer height and nozzle size for optimal results.
This wiki provides specific details on how to complete the above three steps
¶ Apply a thin coat of glue stick for PEI
Before printing with the Magneto X, please applying a thin coat of glue stick to ensure that the first layer sticks to the PEI platform.
¶ Meltzone and Nozzle Recommendations
We suggest beginning with a medium-length meltzone and a 0.4mm nozzle. This approach helps you familiarize yourself with the Magneto X and its Lancer extruders.
¶ Layer Height Guidelines
- With a 0.4mm nozzle, start with a 0.2mm layer height.
- When using a 0.6mm nozzle, it's advisable to switch to a 0.3mm layer height for better results.
¶ Firmware Update Caution
Please refrain from using the auto-update feature in Klipper for Magneto X at this time. Magneto X is running a custom version of 0.11 Klipper that is not yet merged with the main branch and trying to auto-update to 0.12 can lead to printing problems. We will notify you when auto-updates are safe. Until then, please manually flash the mirror or update configurations provided by us.
¶ Hardware Modification Caution
Before you consider disassembling or maintaining the X and Y-axis linear motors, contact us to prevent any potential issues with printing accuracy and motor functionality. Your cooperation is crucial in maintaining the integrity and performance of your Magneto X printer.