The Peopoly Magneto X, a state-of-the-art desktop FFF/FDM 3D printer, stands out with its MagXY magnetic levitation system, delivering unprecedented precision and speed. This printer boasts a 400 x 300 x 300 mm build volume, a PEI magnetic build surface, and a 1000W heater for fast, even heating. Featuring the Lancer extruder, it supports a wide array of materials. Key features include a 1080P camera, a 7-inch IPS touchscreen, and comprehensive connectivity options, making it ideal for both enthusiasts and professionals seeking high-performance 3D printing.
X-axis error
Contact support@peopoly.net replace the X axis cable.
Y-axis error
error1:
Endstop z still triggered after retract
Contact support@peopoly.net replace the loadcell or toolhead pcb.
error2:
TMC 'stepper_z1/2/3' reports error: GSTAT zzz
Contact support@peopoly.net replace the TMC2209 driver
error3:
Klipper has shut down Intemal error on command:"QUAD GANTRY LEVEL BASE"
Contact support@peopoly.net replace the loadcell
error4:
Klipper has shut down Intemal error on command:"BED_MESH_CALIBRATE_BASE"
Contact support@peopoly.net replace the loadcell
error:
See the 'verify heater' section in docs/Config Reference.mdfor the parameters that control this check.
Connect support@peopoly.net replace the hotend